D9412GV3 Control Panel

D9412GV3 Control Panel
  • Fully integrated intrusion, fire, and access control allows users to interface with one system instead of three
  • Conettix IP‑based communication options provide high‑speed, secure alarm transport and control through connection of up to two wired (DX4020) and/or wireless (ITS‑DX4020‑G) network interfaces
  • Up to 32 programmable areas with perimeter and interior partitioning
  • 246 points with flexible configuration options to meet multiple installation requirements
  • Commercial Wireless allows up to 238 RF points
  • Up to 16 supervised keypads (vacuum fluorescent, ATM style, or touch-screen keypads available)
 

Product variants

D9412GV3-A Panel kit w/D1640/D8108A/D101

Contains one PCB, one transformer, and one attack-resistant enclosure.

Commercial Type No.: D9412GV3-A
Product No.: F.01U.167.980

 
D9412GV3-C STD BURGLAR PKG W/D9412GV3

Contains one PCB, one lock and key set, one transformer, and one universal enclosure.

Commercial Type No.: D9412GV3-C
Product No.: F.01U.167.979

 
 
D9412GV3 Control panel, 246 points

Includes one printed circuit board (PCB) with mounting skirt and faceplate with label, and a literature pack and CD.

Commercial Type No.: D9412GV3
Product No.: F.01U.142.676

 

Accessories

ICP-SDI-9114 SDI isolated bus splitter

ICP-SDI-9114 SDI isolated bus splitter

Provides the ability to set up two independent SDI buses from a single SDI connection on the control panel.

Commercial Type No.: ICP-SDI-9114
Product No.: F.01U.029.860

 
D928 Dual phone line switcher, 12V

D928 Dual phone line switcher, 12V

Allows the control panel to operate over and supervise two separate phone lines. Only one D162 phone cord is supplied. Two additional D161 or D162 phone cords are required.

Commercial Type No.: D928
Product No.: 4.998.800.206

 
 
D110 Tamper switch for enclosure, 2pcs

D110 Tamper switch for enclosure, 2pcs

Screw‑on tamper switch that fits all enclosures. Shipped in packages of two.

Commercial Type No.: D110
Product No.: F.01U.246.707

 
ICP-EZTS Dual tamper switch

ICP-EZTS Dual tamper switch

Combination tamper switch with a wire loop for additional tamper outputs.

Commercial Type No.: ICP-EZTS
Product No.: F.01U.217.038

 
 
D101 Enclosure lock and key set

D101 Enclosure lock and key set

Short-body lock set with one key supplied. Uses the D102 (#1358) replacement key.

Commercial Type No.: D101
Product No.: 4.998.800.200

 
D122 Dual battery harness, 17

D122 Dual battery harness, 17" 18AWG

Harness with circuit breaker. Connects two batteries (in parallel) to a compatible control panel.

Commercial Type No.: D122
Product No.: 4.998.800.378

 
 
D122L Dual battery harness, 35'', 12V

D122L Dual battery harness, 35'', 12V

Harness with circuit breaker and leads measuring 35 in. (89 cm). Connects two batteries (in parallel) to a compatible control panel in a separate enclosure.

Commercial Type No.: D122L
Product No.: 4.998.140.606

 
D126 Battery, 12V 7Ah

D126 Battery, 12V 7Ah

A rechargeable sealed lead‑acid power supply used as a secondary power supply or in auxiliary or ancillary functions.

Commercial Type No.: D126
Product No.: 4.998.125.825

 
 
D1218 Battery, 12V 18Ah

D1218 Battery, 12V 18Ah

The D1218 is a 12 V 18 Ah sealed lead‑acid battery with two bolt-fastened terminals. It is used for standby and auxiliary power. It connects to a compatible control panel using a D122 or D122L Dual battery harness.

Commercial Type No.: D1218
Product No.: 4.998.125.820

 
D1224 BATTERY, 12V SEALED LEAD ACID

D1224 BATTERY, 12V SEALED LEAD ACID

A 12 V sealed lead‑acid battery for standby and auxiliary power with two bolt‑fastened terminals. Includes hardware for attaching battery leads or spade connectors.

Commercial Type No.: D1224
Product No.: 4.998.143.606

 
 
D137 Accessory mounting bracket for enclosure

D137 Accessory mounting bracket for enclosure

Used to mount accessory modules in B8103, D8103, D8108A, and D8109 enclosures.

Commercial Type No.: D137
Product No.: F.01U.020.521

 
D1640 Transformer plug-in, 16V 40VA

D1640 Transformer plug-in, 16V 40VA

System transformer rated at 16.5 VAC, 40 VA.

Commercial Type No.: D1640
Product No.: 4.998.125.832

 
 
D8004 Transformer enclosure kit, grey

D8004 Transformer enclosure kit, grey

For applications that might require a remote transformer in an enclosure. Can be used with B Series control panels and D9412GV4/D7412GV4 control panels.

Commercial Type No.: D8004
Product No.: 4.998.140.404

 
D8103 Steel enclosure, large, grey

D8103 Steel enclosure, large, grey

Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.).

Commercial Type No.: D8103
Product No.: 4.998.800.201

 
 
D8108A Attack resistant enclosure, large, grey

D8108A Attack resistant enclosure, large, grey

Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). UL Listed. Includes a lock and key set.

Commercial Type No.: D8108A
Product No.: 4.998.125.920

 
D8109 Fire enclosure, 16x16x3.5

D8109 Fire enclosure, 16x16x3.5", red

Red steel enclosure measuring 16 in. x 16 in. x 3.5 in. (41 cm x 41 cm x 9 cm). UL Listed. Includes a lock and key set.

Commercial Type No.: D8109
Product No.: 4.998.800.205

 
 
D9002-5 Mounting plate, 6 location 3-hole, 5 pcs

D9002-5 Mounting plate, 6 location 3-hole, 5 pcs

5 pack of mounting skirts for B8103, D8103, D8108A, and D8109 enclosures. Each skirt can hold up to six standard 3-hole mounting modules.

Commercial Type No.: D9002-5
Product No.: F.01U.217.699

 
D5500C-USB Kit with DVD and USB security dongle

D5500C-USB Kit with DVD and USB security dongle

Account management and control panel programming software with USB security key (dongle).

Commercial Type No.: D5500C-USB
Product No.: 4.998.143.724