Fiber Optic Media Converters

Fiber Optic Media Converters
  • Utilizes Small Form-factor Pluggable (SFP) modules
  • Multi-mode and single-mode modules available
  • Supports distances up to 20 km (12.4 miles)
  • Surface mount or rack mount capability
  • Details
    Description Fiber Optic Ethernet Media Converter kit.Requires a small form-factor pluggable (SFP) module (sold separately).
    Data Interface Ethernet
    Data Rate 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
    Compatible Receiver CNFE2MC/IN
    Installation Installed inside a NDA-U-PAx, VG4-A-PAx or a VG4-A-PSUx power supply box, or in a MIC IP PSU, with supplied mounting hardware. Note: Wiring for the VG4-SFPSCKT must be routed through the proper conduit opening on the power supply box. Refer to the installation guide that accompanies the module.
    LED Indicators
    Power/Link (on circuit board)
    Green Power is applied, fiber link is valid.
    Red Power is applied, fiber link is missing.
    Green/Flashing Red, rapid Power is applied.Fiber link is valid.Data is present and video is streaming from the camera to a network connection.
    Green/Flashing Red, slow Power is applied.Fiber link is valid.Data is present.Video is not streaming from the camera, or the RJ45 connection to the camera is not valid.
    RJ-45 Connector
    Right side, Flashing Green Data is present.
    Right side, Off No data is present.
    Left side, Amber Link is valid at 100 MB.
    Left side, Off If the right side is flashing green, link is valid at 10 MB.
    No LED lit The network cable is missing, is defective, or the other end of the network cable is not connected.
    Electrical
    Power 24 VAC @ 220 mA (supplied by the camera)
    Current Protection Automatic resettableSolid-state current limiters
    Circuit Board Meets IPC Standard.
    Mechanical
    Dimensions (LxWxH) 7.4 x 7.1 x 3.8 cm (2.9 x 2.8 x 1.5 in.)
    Shipping Weight 0.91 kg (2 lb)
    Environmental
    MTBF > 100,000 hours
    Operating Temperature -40 °C to +50 °C(-40 °F to +122 °F)
    Description Fiber Optic Ethernet Media Converter kit. Requires a small form-factor pluggable (SFP) module (sold separately).
    Data Interface Ethernet
    Data Rate 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
    Installation Surface mount or rack mount using C1-IN rack (sold separately)
    Connectors
    Power Terminal block
    Electrical RJ-45 (10/100 BASE-T/TX)
    Socket SFP (10/100 BASE-FX)
    LED Indicators
    Link/Act
    Green Indicates a good fiber connection.
    Flashing Green Indicates data is present on at least one side of the IP connection.
    No LED lit Indicates a loss of fiber connection.
    Power Green: power is supplied.None: no power supplied.
    Green Power is supplied.
    No LED lit No power supplied.
    RJ-45 Connector
    Right side, Flashing Green Data is present.
    Right side, Off No data is present.
    Left side, Amber Link is valid at 100 MB.
    Left side, Off If the right side is flashing green, link is valid at 10 MB.
    Electrical
    Power
    Supplied Power Pack Input: 90-264 VAC, 50/60 HzOutput: 9 VDC @ 1 A
    Module: 8-15 VDC @ 220 mA
    Current Protection Automatic resettableSolid-state current limiters
    Circuit Board Meets IPC Standard.
    Mechanical
    Dimensions (LxWxH) 16.0 x 13.0 x 2.8 cm (6.3 x 5.1 x 1.1 in.)
    Shipping Weight 0.91 kg (2 lb)
    Environmental
    MTBF > 100,000 hours
    Operating Temperature -40 °C to +75 °C (-40 °F to +167 °F)
    Storage Temperature -40 °C to +85 °C (-40 °F to +185 °F)
    Relative Humidity 0% to 95% (non-condensing)
    Regulatory Compliance cUL, UL, RoHS
    Description Interchangeable modules available for use with MMF or SMF optical fiber.
    Data Interface Ethernet
    Data Rate 10/100 MbpsIEEE 802.3 Compliant
    Mechanical
    Dimensions (LxWxH)
    SFP-2, SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
    SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
    Weight (all SFP modules) 0.23 kg (0.05 lb)
    Type Connector , Wavelength (transmit/receive) , Max. Distance
    SFP-2 MMF , Duplex LC , 1310 nm / 1310 nm , 2 km(1.2 miles)
    SFP-3 SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles)
    SFP-25 MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles)
    SFP-26 MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles)
    Fiber Compatibility
    Optical Fiber Compatibility, MMF 62.5/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
    Optical Fiber Compatibility, SMF 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652.
    Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
    Environmental
    MTBF > 100,000 hours
    Operating Temperature -40 °C to +50 °C(-40 °F to +122 °F)
    Description Rack mount card cage designed to hold a maximum of 14 CNFE2MC/IN modules
    LED Indicators
    Power
    Red Power is supplied.
    No LED lit No power.
    Electrical
    Input Voltage 90-264 VAC at 1 A maximum
    Output Voltage 9 VDC ± 5% at 6.5 A at +75 °C (+167 °F)
    Fusing 1.25 A slow blow (rack power supply)(plug-in modules individually electronically fused)
    Power Indicator Red LED
    AC Line Cord Detachable, IEC-connected. US, European, and UK power cords supplied.
    Mechanical
    Dimensions (LxWxH) 48 x 19 x 15 cm (19.0 x 7.5 x 6.0 in.)
    Rack Slots Fourteen (14) 1-in. slots available
    Shipping Weight 3.4 kg (7.5 lb)
    Environmental
    MTBF > 100,000 hours
    Operating Temperature -40 °C to +75 °C (-40 °F to +167 °F), ambient
    Storage Temperature -40 °C to +85 °C, (-40 °F to +185 °F), ambient
    Heat Generation 240 BTU
    Regulatory Compliance FCC part 15, , cUL, UL, RoHS

    Images

     
  • Documents (6)
     
 

Product variants

VG4-SFPSCKT ETHERNET TO SFP INTERFACE KIT

Ethernet media converter video transmitter/data receiver fiber optic kit for AUTODOME cameras and for MIC-IP-PSU for MIC analog cameras.

Commercial Type No.: VG4-SFPSCKT
Product No.: F.01U.142.529

 
SFP-3 Fiber module, single-mode, 1310nm, 2LC

SFP Fiber Optic Module, 20 km (12.4 miles), 2 LC connectors.

Single-mode

1310 nm

Commercial Type No.: SFP-3
Product No.: F.01U.136.538

 
 
SFP-25 Fiber module, 1310/1550nm, 1SC

SFP Fiber Optic Module, 2 km (1.2 miles), 1 SC connector

Multi-mode

1310/1550 nm

Commercial Type No.: SFP-25
Product No.: F.01U.136.541

 
SFP-26 Fiber module, 1550/1310nm, 1SC

SFP Fiber Optic Module, 2 km (1.2 miles), 1 SC connector

Multi-mode

1550/1310 nm

Commercial Type No.: SFP-26
Product No.: F.01U.136.542

 
 
SFP-2 Fiber module, multimode, 1310nm, 2LC

SFP Fiber Optic Module, 2 km (1.2 miles), 2 LC connectors.

Multi-mode

1310 mm

Commercial Type No.: SFP-2
Product No.: F.01U.136.537

 
CNFE2MC/IN Media converter with SFP socket

Single-port 10/100 Mbps Ethernet Media Converter, 120/230 VAC

Commercial Type No.: CNFE2MC/IN
Product No.: F.01U.136.545

 
 

Accessories

C1-IN Rack mount card cage

C1-IN Rack mount card cage

EIA 19-in. rack for CNFE2MC, 120-230 VAC

Commercial Type No.: C1-IN
Product No.: F.01U.136.543

 
C1-BP Blank panel for rack mount card cage

C1-BP Blank panel for rack mount card cage

Blank panel for C1 rack mount card cage, 1 slot width (1 in.)

Commercial Type No.: C1-BP
Product No.: F.01U.136.544

 
 
EWE-CNFE-IW 12mths wrty ext CNFE Media Converter

EWE-CNFE-IW 12mths wrty ext CNFE Media Converter

12 months warranty extension

Commercial Type No.: EWE-CNFE-IW
Product No.: F.01U.346.339;F.01U.345.897